42
Step 4: The wire diameter of the NTC cable is smaller than the sealing port of the Multi COM
connector. It is recommended to add some rubber cement into the sealing port after installation
to make it waterproof.
6.7 WIFI Connection
The inverter provides a communication port, which can collect data and transmit data of the
inverter to the monitoring website via Wi-Fi stick.
WIFI Dongle (Wi-Fi & Bluetooth 2in1 function) implements communication with Cloud server
through wireless network to monitor the inverter's data status. For more details, refer to WIFI
Application Manual.
Wiring Connection Procedure：
Step 1: Remove the waterproof lid from the Wi-Fi/4G terminal.
Step 2: Insert the Wi-Fi stick into the communication port.
Slightly shake it by hand to determine whether it is installed firmly.
Step 3: Build the connection between the inverter and router. Please refer to the Pocket Wi-Fi
user manual to configure the WLAN.
To Next Page
Loading...
