5
•
A faulty ground connection can result in equipment failure, personal and death
injuries, and electromagnetic interference.
•
Ensure correct according to grounding to lEC62109 and conductor diameter
according to STANDARD specification.
•
Do not connect the grounding end of the equipment in series to prevent multi-point
grounding.
•
Electrical appliances must be installed in accordance with the wiring rules of each
country.
For United Kingdom
•
The installation that connects the equipment to the supply terminals shall comply
with the requirements of BS 7671.
•
Electrical installation of PV system shall comply with requirements of BS 7671 and
IEC 60364-7-712.
•
All protective devices cannot be changed.
•
User shall ensure that equipment is so installed, designed and operated to
maintain at al times compliance with the requirements of ESQCR22(1)(a)
2.8 EU Declaration of Conformity
Hangzhou Livoltek Power Co., Ltd. hereby declares that the inverter with wireless
communication module sold in the European market meets the requirements of the
following directives:
•
Radio Equipment Directive 2014/53/EU (RED)
•
Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863
(RoHS).
•
Waste Electrical and Electronic Equipment 2012/19/EU
•
Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No
1907/2006 (REACH).
•
You can download the EU Declaration of Conformity on https://livoltek.com.
To Next Page
Loading...
