LNS Alpha ST320 S2 - Page 70

7-12 CHAPTER 7: GENERAL DESCRIPTION
ALPHA ST320 S2
Rotating sleeves, adaptations, Finger chucks
Channel
size
Rotating
sleeve
Adaptation
Finger chuck
(ref. to max. OD of chuck)
08 015.15.1064/7 --- 015.15.053/7
11 015.031.013/10 028.031.024 015.15.053/10
14 015.031.013/10
028.031.034
028.031.044
015.15.053/10
015.15.053/12
17 015.031.013/15
028.031.054
028.031.064
028.031.064
028.031.074
015.15.053/10
015.15.053/12
015.15.053/14
015.15.053/16
19 015.031.013/15
028.031.084
028.031.094
028.031.094
028.031.104
028.031.104
015.15.053/10
015.15.053/12
015.15.053/14
015.15.053/16
015.15.053/18
21 015.031.013/15
028.031.124
028.031.124
028.031.134
028.031.134
028.031.144
015.15.053/12
015.15.053/14
015.15.053/16
015.15.053/18
015.15.053/20
Example:
• Example1:
If the user wants to change the current channel from someone to 21. The bar feed system
is 12’, the lathe is fixed type and the front tube length is 260. He has to order:
XTP21-20-37-E1 and STT21-260
• Example2:
If the user wants to change the current channel from someone to 17. The bar feed system
is 3m and the lathe is Swiss type. He has to order:
XTP17-16-32-E1 and XT193061700.