- 20 -
SETTING UNITS OF MEASURE
These are the available units of measure:
: kilograms
: grams
: tons
: pounds*
: newtons*
: litres*
: bars*
: atmospheres*
: pieces*
: newton metres*
: kilogram metres*
: other generic units of measure not included in the list*
If the print function is enabled, the symbol corresponding to the selected unit of measure will be
printed after the measured value.
For the units marked with * it’s possible to set also the display coefficient (parameter
, see the related section). To use is necessary to enable it, closing the
input (see section OUTPUTS AND INPUTS CONFIGURATION).
DISPLAY COEFFICIENT
By setting the coefficient the display is changed accordingly.
If one of the inputs is set to mode (see section OUTPUTS AND INPUTS CONFIGURATION)
when the input is closed the value will be displayed modified according to the coefficient; when
the input is opened the standard weight display will be restored.
: (max settable value: 99.9999; default: 1.0000) will have different meanings according to the
value set in , i.e. the selected unit of measure. (see section SETTING UNITS OF MEASURE).
To Next Page
Loading...
Need help?
General