Loepfe YARNMASTER ZENIT+ - Group Definition and Configuration; Accessing Group Settings Overview; Entering Group Settings Edit Mode; Core Group Settings

Quick Guide YM Zenit
+
18
16 Define a Group
SETTINGS > Group (List)
1.
Double-clicking a group in the list opens the overview
of the respective group settings.
2. Activate the edit mode with .
> SETTINGS Optional
8.
Accept / change default settings.
> Data Acquisition
9.
Accept / change default settings.
10. Save group settings with .
> SETTINGS Group
3.
First Spindle / Last Spindle: Enter spindle range (first
and last spindle of the group).
4. Pilot Spindles: Accept / change default.
5. Sensing Head Type: Select installed sensing head type.
6. Lot: Enter a lot name (optional).
7. Article: Select an article.