1. Important Safety and Emissions Information
The specifying Original Equipment Manufacturer (OEM) and/or installer of
any LOFA panel is responsible for all safety labeling and operator education
regarding the safe operation of this panel and the operation of the specific
machine that this panel is installed upon including conformance to exhaust
emissions regulations.
LOFA products are not designed for, or intended for use on, applications
requiring explosive proof components. Further, LOFA products are not
designed for, or intended for application within, hazardous or explosive
environments.
The installer of this LOFA product is solely responsible for ensuring that
all OSHA, ANSI, CE, or other applicable standards are met with respect
to LOFA panel applicability, machine guarding, general safety guidelines,
labeling, and warnings.
The installer of this LOFA panel and/or LOFA harness is responsible for the
correct sizing and integration of a suitable fuse/breaker on the un-switched
DC circuit supplying power to the LOFA panel.
Only trained and qualified persons may perform installation, testing, service,
or repair work on the LOFA product.
The seller hereby expressly disclaims all warranties, either expressed or
implied, including any implied warranty of merchantability or fitness for a
particular purpose, and neither assumes nor authorizes any other person
to assume for it any liability in connection with the sale of such products.
Please refer to www.LOFA.net for details on LOFA Industries, LLC warranty
policies.
LOFA Industries, LLC has provided this document as a reference. We
try to keep this document updated with the latest information regarding
your LOFA product. However, changes do occur and LOFA reserves the
right to make changes to the design of the LOFA products and supporting
documentation without notice.
Page 2 LOFA document No. 463-3002-59 Page 2
To Next Page
Loading...
