Logan L-A846-ND - Network Connection Setup; 3 G Card Dial-up Configuration; DHCP IP Assignment; Manual IP Configuration

To Next Page

To Previous Page

User Manual

56/183

Step 2：Disconnect ADSL dial-up

1. Click【disconnect】

4.4.1.3 3G card dial-up

Function position：Network| Network setting|PPPoE

Function introduction： 3G card dial-up

Step 1：3G card dial-up

1. Click【setting】

2. Write card number/account/password

Please take 5.2 3G card dial-up for reference for number/account/password setting

4. Click【connect】

Note: After successful dial-up, it can dial-up automatically after restart DVR or outage.

Step 2：Disconnect 3G network card dial-up

1. Click【disconnected】。

4.4.1.4 DHCP gets IP automatically

Function position：Network| network setting

Function introduction：DHCP gets IP automatically in LAN

Open DHCP steps：

1. Confirm route to open DHCP, that can be used normally

2. Choose” Automatic IP（DHCP）”；

3. Click【Apply】or【ok】 It can get IP automatically

Note: when using DHCP function, it can not make manual IP etc parameters setting

4.4.1.5 Manual setting IP

Function position：Network| network setting

Function introduction：Manual setting IP in LAN.