User Manual
6/183
1. Production Introduction
Network DVR is a monitoring product that allows audio and video synchronized. It adopts embedded and micro processor, so system runs more steadily. This product
integrates functions such as video & audio, network transmission, alarming management, etc. Meanwhile, it has the features of DVR and DVS. It can not only work alone, but
also can be networked to a powerful security monitoring network. It is widely used in school, factory, supermarket, bank, traffic, water conservancy facilities, residential area,
and warehouse department, etc.
2. Installation
2.1. HDD Installation
1． Ensure Power supply has been disconnected, open the case cover;
2． Connect HDD data line, power line first , then fix the HDD in the case;
3． Install the cover, connect the power, which with adaptor, press the power switch;
4． Formatting the HDD (Please check details from : System Setup—Device—Storage —Formatting ;
5． Network DVR can normally make snapshot and video.
2.2. 2.1 Front panel
The front panel of A series
To Next Page
Loading...