User Manual
68/183
◆Start record: It will record the selected channels
◆Call preset: It will adjust selected preset of PTZ channel
◆Snapshot: It will snapshot the selected channel and save images.
◆Output Module: It will open alarm for the relative device (normal close)
2.Click【ok】,save setting
Step 4：Detect Alarm device
1. Touch alarm device
2. Selected alarm out parameter setting work normally
3. Top menu will popup alarm coin, and record log at same time
4.5.4 Alarm task
Function position：System setup| Alarm| Alarm task
Function introduction：It only send alarm output in preset time
To Next Page
Loading...