Need help?Do you have a question about the Logan L-A846-ND and is the answer not in the manual?
Setting resolution, kbps, and fluency for the primary video stream.
Configuring audio compression, monitoring, and binding with video.
Configuring network parameters for LAN and WAN connectivity.
Steps for configuring ADSL dial-up using account name and password.
Steps for configuring a 3G network card for dial-up internet access.
Enabling and configuring WebCC for web-based remote monitoring.
Enabling and configuring motion detection as an alarm trigger.
Enabling and configuring alarms for loss of video signal.
Setting up external alarm devices to trigger alarms.
Configuring email sender, receiver, and server settings for alerts.
Searching, backing up, and managing system operation logs.
Steps to search and view detailed system operation logs.
Procedure for backing up system logs to a U-disk.
Details on updating the DVR firmware using USB, FTP, or online sources.
Restoring the DVR to its default factory settings.
Exporting and importing DVR configuration settings for backup or transfer.
Querying and formatting storage devices like hard disks and U-disks.
Configuring PTZ camera address, protocol, and other control parameters.
Steps to open the PTZ control interface for camera adjustments.
Steps to add new preset points to PTZ camera patrol routes.
General| Brand | Logan |
|---|---|
| Model | L-A846-ND |
| Category | Security System |
| Language | English |
To Next Page