Logan L-A846-ND - Network Service Configuration; WebCC Remote Monitoring Setup

User Manual
57/183
Manual setting steps：
1. Cancel” Automatic IP（DHCP）”function；
2. Manual writing IP/ NetMask / Gateway/DNS
3. Click【Apply】or【ok】
4.4.2 Network service
Function position：Network| network service
Function introduction： 1. Realize web monitoring by WebCC
2. Realize Bi-directional talk between local and remote monitoring
4.4.2.1 WebCC
Function position：Network|Network service|WebCC
Function introduction： Realize web monitoring by WebCC; Connect with DVR by device IP