EasyManuals Logo

Logic FORCE User Manual

Logic FORCE
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
22
others. If you have selected this function, you must
enter the PIN1 code each time you turn on the
Tablet so that you may unlock the SIM card and
then make or answer calls. You can deactivate SIM
card protection (see “Safety settings”). In this case,
the misuse of your SIM card cannot be prevented.
Press the Hang Up key to turn on your
Tablet;
Enter your PIN1 code. Clear the incorrect
digits by using the right soft key, and press
OK for confirmation. e.g. if your PIN1 is 1234,
please enter:
1 2 3 4
If you enter incorrect numbers for three times
in succession, your SIM card will be locked and
your Tablet will ask you to enter PUK 1 number. If
you do not know the PUK1 code, do not try.
Instead, contact your network service provider.
See “Safety settings”.
Note: your network service provider sets a
standard PIN1 code (4 to 8 digits) for your SIM
card. You should immediately change this number.
See “Safety settings”.
2.4.4 Unlocking your Tablet
To prevent unauthorized use, you can set
Tablet protection. If you have selected this
function, you must draw unlocking pattern each
time you turn on your Tablet, to unlock the Tablet
and then make or answer calls. You may clear the
unlocking pattern (see “Safety settings”). In this
23
case, the unauthorized use of your Tablet cannot
be protected.
If you forget your Tablet password, you must
contact the retailer or local authorized service
center to unlock your Tablet.
2.4.5 Connecting to the network
Once your SIM card is unlocked, your Tablet
searches for available network automatically (the
screen will show the network searching is
underway). If your Tablet has found the available
network, the name of network service provider
appears at the center of screen.
Note: Making an emergency callNote: If “only for
emergency calls” appears on the screen, it
indicates that you are beyond the network
coverage (service area), and that you can still
make emergency calls depending on the signal
intensity.
2.4.6 Making a call
When the logo of network service provider
appears on the screen, you can make or answer a
call. The bars at the upper left corner of screen
indicate the intensity of network signal.
Conversation quality is significantly affected
by obstacles, thus moving within a small area

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logic FORCE and is the answer not in the manual?

Logic FORCE Specifications

General IconGeneral
Screen Size10.1 inches
Resolution1280 x 800 pixels
ProcessorQuad-Core 1.3 GHz
RAM2 GB
Rear Camera5 MP
Front Camera2 MP
Operating SystemAndroid
Expandable StoragemicroSD up to 32 GB