12
and corrode.
Please do not use or place batteries in places
of high temperature such as in direct sunlight,
as this will cause the battery to leak and
overheat, lower performance, and shorten
the battery’s life.
Please do not continuously charge for more
than 24 hours.
1.3.4 Charging your Tablet
Connect the connector of charger to the Tablet.
The battery level indicator flashes on the screen.
Even if the Tablet has been turned off, the
charging image still appears, indicating that the
battery is being charged. If the Tablet is overused
when the current is insufficient, it may take longer
time for the charging indicator to appear on the
screen after the charging begins.
When the battery level indicator does not flash
and indicates the battery is full, this indicates the
charging has been completed. If the Tablet is off
during charging, the charging being completed
image also appears on the screen. The charging
process often takes 3 to 4 hours. During the
charging, the battery, Tablet and charger gets
13
warm, this is a normal phenomenon.
Upon the completion of charging, disconnect the
charger from AC power socket, and from the
Tablet.
Notes:
During charging, the Tablet must be placed in
well-ventilated environment of ＋5 ℃ ~ ＋40 . ℃
Always use the charger supplied by your Tablet
manufacturer. Using an unauthorized charger
might cause danger and invalidate the
authorization and warranty clauses for your
Tablet.
The standby time and call duration provided by
the manufacturer are based on ideal operating
environment. In practice, the battery's operating
time varies depending on network conditions,
operating environment and usage methods.
Make sure the battery has been installed before
charging. It is best not to remove the battery while
charging.
Upon completion of charging, disconnect the
charger from your Tablet and the power supply.
To Next Page
Loading...
Need help?
General