G120F/G160F/G200F Part III Maintenance
- 23 -
3-2 Engine oil
· Oil is the major factor affecting performance and
service life. Don’t use oil containing additives and
2-stroke engine oil, because they lack sufficient
lubricating ability and will shorten the gasoline
engine’s service life.
· Check the oil level with the engine stopped and on a
flat level surface.
· Oil capacity: 0.60 L
In order to obtain the best performance of the engine,
it is recommended to use special engine oil certified
to be OK for Loncin engines. SAE 10W-30 is the
recommended oil. Other viscosities shown in the
chart may be used when the average temperature in
your area is within the recommended range.
Oil level check:
1) Remove the oil cap/dipstick and wipe it clean.
2) Insert the oil dipstick into oil filler neck but do not
screw it in, and check oil level.
3) Oil level is too low if there is no oil on the dipstick.
Add recommended oil to bring the oil level to the
upper limit of the dipstick.
4) Reinstall the cap/ dipstick securely.
· Used engine oil contains carcinogenic substances. If repeatedly left in contact with
the skin for prolonged periods, it may cause skin cancer. Wash your hands
thoroughly with soap and water as soon as possible after contact with used engine
oil.
Ambient temperature
To Next Page
Loading...
Need help?
General
