LONCIN G120F User Manual

G120F/G160F/G200F Part IV Disassembly and maintenance
- 37 -
4-3. Carburetor
1. Removal / disassembly
No smoking or fire
Diassembly:
Pull the carburetor forward to a point
where the groove in the throttle arm
lines up with the governor rod, and lift the
rod out of the hole on the throttle arm.
Unhook the anti-surge spring from the
throttle lever. Remove the carburetor
from the cylinder head.
Reassemble in the order contrary to the
order of disassembly.
Reassembly:
Blow out the passage using compressed air and
install, noting the inatllation directions on inner and
outer sides. After installing, securely install high
tension cord and fuel tube.
Fuel tube
High tension cord
Reassembly: Plug the fuel tube with
the choke lever’s lug after removing
the fuel tube to prevent fuel
leakage.
Fuel tube
Choke lever
Governor rod
Throttle return spring
Carburetor
High tension cord
Insulator gasket
Carburetor heat insulating gasket
Governor
Anti surge spring
Lug
Groove
Throttle
Choke lever assy
Fuel tube
Carburetor gaske

LONCIN G120F Specifications

General

Brand	LONCIN
Model	G120F
Category	Engine
Language	English