Operating Your Appliance 23
© Travis Industries 100-01282_000 4111128
Ash Removal
Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes
should be placed on a noncombustible floor or on the ground, away from all combustible materials,
pending final disposal. If the ashes are disposed of by burial in soil or otherwise locally dispersed,
they should be retained in the closed container until all cinders have thoroughly cooled.
Ash Pan Removal
Do not operate this stove with the ash pan open. A fire
hazard will result.
The ash pan must be properly inserted and fully closed during operation. Failure to fully close and
seal the ash pan may lead to an over-fired stove, negating the warranty and creating a safety hazard.
The ash pan may be removed only after the stove has fully cooled.
To remove the ash pan:
1. Twist the ash pan handle down and pull out the ash pan.
2. Lift out the ash pan by the edges and use the handle to transport the ash pan to the metal container.
ASHES
To Next Page
Loading...
