EasyManua.ls Logo

Lopi Cape Cod - Features and Specifications; Installation Options; Heating Specifications; Dimensions

Lopi Cape Cod
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Features & Specifications
© Travis Industries 100-01282_000 4111128
Installation Options
Freestanding
Freestanding in an Alcove
Freestanding in a Mobile Home
Optional GreenStart Igniter
Optional High-Tech Blower
Features
EPA Phase II Approved
3.0 Cubic Foot (0.278 M
2
) Firebox Volume
Single Operating Control
Accepts Logs Up to 24" (610mm) Long
Cast Iron Construction
Heavy Duty Refractory Firebrick
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)* up to 2,500 (232 M
2
)
Maximum BTUs per Hour (Cord Wood Calculation) 86,000
Maximum Burn Time Up to 12 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions
Figure 1
(a) Side, rear and corner clearances are measured from the stove top.
(b) Rubber-Tipped Leveling Bolts (at each corner).
Emissions
0.45 Grams per Hour (EPA Phase II Approved).
Weight: 600 Lbs. (267 Kg)
3-1/4"
83mm
32-1/4"
821mm
19-3/4"
501mm
2"
51mm
a
b
35"
889mm

Table of Contents

Other manuals for Lopi Cape Cod

Related product manuals