Basic Setup (DV700 Series)
6
6.10 Quick Access to System Information
To quickly open a window that displays vital system information:
• Right-click to open the Quick Menu and click Info. Enter the system user name (default:
admin) and password (default: 000000).
OR
• Press the
button on the front panel.
OR
• Press the ENTER button on the remote control.
NOTE
The QR code shown in the System Info screen can be scanned during mobile setup to enter the sys-
tem’s Device ID.
6.11 Connecting Cameras
6.11.1 Camera Compatibility
This system is compatible with 1080p MPX, 720p HD, and analog cameras. For a list of
compatible cameras, please visit www.lorextechnology.com/support.
6.11.2 About Lorex MPX Cameras
Lorex MPX cameras transmit high-definition video over BNC cable (such as RG59). They
use analog signals and can transmit video signals over long cable runs.
Lorex MPX cameras use a proprietary analog standard that only works with Lorex MPX
DVRs. MPX is not compatible with HD-SDI equipment.
6.11.3 Installing Cameras
CAUTION
Cameras differ in terms of installation or mounting instructions. Please see the documentation that came
with your camera(s) for specific installation instructions.
Installation Tips
• Test the cameras before permanent installation. Plan where you will route the wiring for
the camera and where you will aim the camera.
• Mount the camera where the lens is away from direct and intense sunlight.
• Plan your cable wiring so that it does not interfere with power lines or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible, but out of reach.
#LX400060; r.30328/30328; en-US
12
To Next Page
Loading...
Need help?
General