Using the Main Menu15
15.3.3 Configuring System Ports (Connection)
The Connection menu allows you to configure ports used by the system. Please note that
port forwarding is not required to use FLIR Cloud™ or to connect using the apps.
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (defaut:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From the Main Menu, click
and then select Network>Connection.
2. Configure the ports as needed and click OK to save changes.
NOTE
Up to 3 devices may connect to the system at the same time.
15.3.4 Configuring DDNS Settings
Lorex DDNS is available as an optional connectivity option. Please see 19 DDNS Setup
(Advanced), page 147 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the In-
ternet without requiring port forwarding or DDNS registration. For details, see 16 Connect-
ing to Your System Over the Internet on PC or Mac, page 75.
To configure DDNS Settings:
1. Visit http://www.lorexddns.net and register for a DDNS account.
2. From the Main Menu, click
and then select Network>DDNS.
#LX400060; r.30328/30328; en-US
57
To Next Page
Loading...
Need help?
General