Installing the Receiver
4
• Adjust the antenna on the receiver as necessary to provide the clearest
reception.
• The receiver comes with a microSD card pre-inserted, so you can start re-
cording right away. The receiver is compatible with most major brands of
microSD cards up to 32 GB. For recording times on microSD cards, see
8.11 Maximum Recording Times, page 34.
4.1 Setting the Time
It is highly recommended to set the date and time on the system prior to re-
cording, as they will be used to stamp recordings. You must set the correct
date and time in order to use schedule recording.
To set the time:
1. Press
to open the main menu.
2. Select the System Setting icon using the
/ keys, then press .
3. Select Clock setup, then press .
4. Press
/ to configure the current date and time. Press / to
move between items.
5. When finished, press to save settings.
6. Press
repeatedly to close any remaining menu windows.
The date and time appears at the bottom of the screen in live viewing
mode. The date and time also appears in recorded video at the top of the
video display.
#LX400030; r. 2.0/22135/22135; en-US
9
To Next Page
Loading...
Need help?
General
