6
Installing the camera
2 Twist the antenna clockwise onto the antenna port on the side of the camera.
3 Attach the camera to the mounting stand. Adjust the angle of the camera until the desired
view is set. Tighten the thumbscrews to secure the desired camera position.
Connect camera stand
Tighten thumb screws
4 Connect the black power cable extending from the camera to the cable of the power adapter;
plug in the power adapter to an outlet or surge protector.
NOTE: You can install additional cameras (maximum of 4 cameras). When adding cameras
that wer
e not included in the original box, you will need to pair the cameras with
the receiver. For details,see “Appendix C: Adding Cameras” on page 33.
To Next Page
Loading...
Need help?
General
