20
Recording
Viewing Recorded Video
With video recorded on the SD card, you
can open the File menu to playback the
video files.
All recording must be stopped on
the system prior to playing back
saved video files.
ATTENTION
You can playback recorded video on the
system (when connected to a TV or
monitor) or directly from the SD card -
simply connect the SD card to your
computer.
Viewing Video Using the System
To playback recorded video on the
system:
1 Stop all recording on the system.
2 Press the Ent
er button on the remote. The
File menu opens.
3 Select the VIDEO f
older and press Enter
button on the remote.
4 Select a folder and press the Enter b
utton
on the remote. Folders are labeled by date
(yymmdd): e.g. 080512. Select [. .] and
press the Enter button on the remote to go
up a level.
5 Select a file from the list and press the
Enter
button on the remote. The selected
file loads and playback begins.
Tip:
Press LEFT and RIGHT to change pages
to find v
ideo files quickly.
Controlling Playback
Once the file begins playing, use the
buttons on the remote control or
wireless receiver to control playback.
To control playback:
•
: Play/Pause playback; restart video
from the beginning.
•
: Fast forward playback 2X, 4X, 8X, 16X,
32X, and 64X. During fast-forward, press
to pause and then press again to
play
• : Stop playback.
•
:Rewind playback 1X, 2X, 4X, or 8X.
During rewind, press
to pause, then
press
again to play.
• Volume + / - : Press to increase/decrease
volume during playback.
• Press the MENU button to return to the
file list
To Next Page
Loading...
Need help?
General
