15
Using the System
Setting the time
It is highly recommended to set the time on the
system prior to recording. You need to set
Date & Time menu.
Date and time
the
correct date and time in order to use Schedule
Recording. For more details, see “Motion
recording” on
page 19.
To set the time:
1 From the Main Menu, select Setting
and press the
Enter button on the remote.
2 From the Setting menu, select Date
& Time and
press the Enter button on the remote.
3 Press RIGHT/
LEFT to move the cursor; press UP/
DOWN to change the year, month, day, hour,
minutes, and seconds.
NOTE: The system uses a 24-hour clock.
4 Press Enter on
the remote to save your settings.
5 Press MENU on
the remote to close any remaining
menu windows.
NOTE: There no daylight savings time (DST) setting
on
the system. DST must be set manually if
necessary.
To Next Page
Loading...
Need help?
General
