Lorex LW2910 Series User Manual

29
Using the Main Menu
2 From the Settings menu, select Alarm
Volume and press the Enter button on the
remote.
3 Press RIGHT to increase the alarm
v
olume, and press LEFT to decrease the
alarm volume.
4 Press the Ent
er button on the remote to
save your settings.
5 Pr
ess the MENU
button on the remote
until all menu windows are closed.
Zoom
Use the zoom menu to enable 1X and 2X
digital zoom on the cameras. While
zoomed in, you can scan the image and
view channels in full-screen.
NOTE: Zoom is
intended as a temporary
setting that is applied to ALL
CHANNELS. When you are
finished using zoom, you should
return the view to 1X view.
To set the zoom:
1 View camera 1, 2, 3 or 4 in single-channel
ful
l-screen.
2 From the Main Menu, select Setting and
pr
ess the Enter button on the remote.
3 From the Settings menu, select Zo
om and
press the Enter button on the remote.
4 Select X 1 or
X 2 and press the Enter
button on the remote.
5 Pr
ess the MENU
button until all menu
windows are closed. The selected camera
will be shown on the main display in 2X
zoom.
While zoomed in you can perform the
following
:
• Press LEFT/RIGHT/UP/DOWN to scan the
imag
e.
• Press the CHANNEL-M button on the
remote to change channels manually (you
can only change channels using the
CHANNEL-M button while zoomed in)
• Press CHANNEL-A to enable Auto
Sequence
• Press the Record button
() to start/stop
manual recording
• Press the Quad button on the remote to
view Quad mode - all channels will be
zoomed-in
To disable zoom:
1 Open the Zoom menu.
2 Select X 1
and press the Enter button on
the remote.
3 Pr
ess the MENU butt
on on the remote
until all menu windows are closed.

Lorex LW2910 Series Specifications

General

Brand	Lorex
Model	LW2910 Series
Category	Security System
Language	English