66
Does that mean Fish I.D. is broken? No — the feature is interpreting
sonar returns in a specific way to help take some of the work out of
reading the screen. Remember: Fish I.D. is one of the many tools we
provide so you can analyze your sonar returns for maximum fish find-
ing information. This and other features can help you successfully "see"
beneath the boat under varied water and fishing conditions. So, prac-
tice with the unit in both the Fish I.D. mode and without to become
more familiar with the feature. Fish I.D. is off by default.
Sonar Features menu with Fish I.D. Symbols selected.
To turn the Fish I.D. feature on:
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press → to
FISH SYMBOLS|ENT|EXIT|EXIT.
To turn off Fish I.D., repeat the instructions in step 2.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
To Next Page
Loading...
Need help?
General