88
To adjust the Surface Clarity level:
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press ↓ to
SURFACE CLARITY|ENT.
3. Press
↓ ↑ to select clarity level, then press EXIT repeatedly.
In the illustration (left) Surface Clarity is turned off.
The view shows Surface Clarity set at High (right).
Transparency
Use the transparency menu to adjust the transparency of menu win-
dows. A high transparency allows you to continue monitoring the
screen's display while adjusting feature settings, though the text of the
menus may fade until it is unreadable. A low transparency will usually
make menu text easier to read, at the cost of watching your display.
Experiment with this feature until you find the right level of transpar-
ency for your eyes.
Transparency selected (left). Transparency slider bar (right).
Surface clutter
To Next Page
Loading...
Need help?
General