LSIS eXP Series, eXP20-TTA - Page 43

Chapter 4 System Configuration
4-10
Printer Settings
(Dialog)
Name
Description
Port
Displays the connection type.
Printer type
Displays the type of printer.
Print direction
Sets whether horizontal or vertical.
Print color
Sets whether color or black and white.
High quality print
Specifies whether the advanced printing.
More...
More Properties: Displays additional properties. If you
change the additional printer properties, check the
information in the dialog. After that, press the OK
button to save settings.
OK
To save the settings.
Cancel
To cancel the setting.
Printer Check To diagnose the connection status of the printer. This
feature is only supported Sewoo printer (LK-P30, LK-
P41, LK-P43). Press the button to display the current
printer status. Please mount again the printer cable if
the printer is already powered with the cable
connected.
*Messages*
1. OK: Normal state
2. No Printer: Not connected to the printer
3. Cover Open: Paper cover is open
4. Paper Empty: Out of paper
Test Page This function is designed to te
st the print output
status. Outputs the following information, and it briefly
shows the current print stat.
***********************************
Test page
***********************************
DateTime: 2014-02-04 10:00:00
XP-Runtime version: 1320
Printer driver version: 1.00
Printer name: PCL3 LaserJet
Port: USB
***********************************