LSIS eXP Series, eXP20-TTA - Connection Information

Chapter 6 Viewing Information of PLC Connection Status
6-3
6.2 Connection Information
You can check the setting items for the connection with PLC such as vender of PLC, target device, connection
type, ip address, connection information and timeout value in the XP-Builder.
[PLC information screen]
[PLC connection information]
[Dialog box Description]
Name
Description
Connection No.
The communication connection No. is displayed from No.0-15.
Vendor
The vendor of the communication target device is displayed.
Target device
The communication target device is displayed.
Connection type
The connection type is displayed
Timeout value
The set-up timeout value is displayed.
Send wait value
The transmission wait value is displayed.
Retry value
In case when timeout occurs during communication, the retry value is displayed.