LSIS eXP Series, eXP20-TTA User Manual

Chapter 12 EMC Standard Certification
12-1
Chapter 12 EMC Standard Certification
12.1 Requirement for EMC Standard Certification
EMC command is regulated on “It doesn’t produce the Strong electromagnetic waves: Emission” and “It is not
affected by electromagnetic wave from external: Immunity”. The following is describing the contents to meet the
EMC command when configuring the system by using the XGT Panel. This is a summary document for the
request and standard which our company has obtained from EMC but we don't assure that all devices
manufactured according to these contents are not suitable for the below standards. The final manufacturer needs
to finally judge about the fitness method or fitness judgment of EMC command.
12.1.1 CE standard certification
In case of XGT Panel, the EN61000-6-4, EN61000-6-2, EN61000-3-2, and EN61000-3-3 of CE standards were
applied.
Applied Standards Results
1. Emission
Conducted Disturbance EN61000-6-4:2007 / A1 : 2011 C
Radiated Disturbance EN61000-6-4:2007 / A1 : 2011 C
Harmonic Current Emission EN61000-3-2:2014 N/T
Voltage Change, Fluctuations and Flicker
EN61000-3-3:2013
N/T
2. Immunity
Electrostatic Discharge
EN61000-6-2:2005 / AC : 2005
C
EN61000-4-2:2009
Radio-Frequency Electromagnetic Field
EN61000-6-2:2005 / AC : 2005
C
EN61000-4-3:2006 / A1 : 2008 / A2 : 2010
Fast Transient
EN61000-6-2:2005 / AC : 2005
C
EN61000-4-4:2004 / A1 : 2010
Radio-Frequency Continuous Conducted
EN61000-6-2:2005 / AC : 2005
C
EN61000-4-6:2009
Power-Frequency Magnetic Fields
EN61000-6-2:2005 / AC : 2005
N/T
EN61000-4-8:2010
Surges
EN61000-6-2:2005 / AC : 2005
C
EN61000-4-5:2006
Voltage Dips and Interruptions
EN61000-6-2:2005 / AC : 2005
N/T
EN61000-4-11:2004
C=Comply NC=Not Comply N/T=Not Tested N/A=Not Applicable
Directive:
Electromagnetic Compatibility Directive 2004/108/EC

LSIS eXP Series, eXP20-TTA Specifications

General

Brand	LSIS
Model	eXP Series, eXP20-TTA
Category	Touch Panel
Language	English