7.3 Uploading Project through the Storage Equipment
1. If you touch [Project Upload], the following dialog shows.
2. Please select the targeted external memory in “Select Source”. Following path is indicated depending on the
selected external memory
- USB: \USB Storage\XP_Backup\
3. If you touch [OK] button, project backup file is transmitted to the selected path.
4. The project backup file is saved when Download project backup file is selected when downloading the
project. If you don’t select, project backup file is not saved in the device and transmission to the storage
equipment is not available.
To Next Page
Loading...
Need help?
General
