Chapter 10 Installation and Wiring
It describes the wiring that you should know when installing the XGT Panel.
10.2.1 Power wiring
eXP Panel is the DC product.
Power Name
DC 24V
eXP20-TTA/DC, eXP20-TTA/DC,CERTI
eXP30-TTA(B)/DC, eXP30-TTE/DC
eXP40-TTA(B)/DC, eXP40-TTE/DC
► If AC power is applied into the product for DC power, It may cause damage or fire. Be careful
of connection.
► ‘/DC’ is the product which use DC 24V. When using the product, Please check the label
in the back of the product.
► All field-wiring connections to this unit shall be from Limited Voltage/Limited Current, below
24Vdc isolated secondary source with an output fused with a 4A fuse max. or Class 2 secon
-dary circuits as defined in UL 508, 17
th
Edition.
Warning
To Next Page
Loading...
