LSIS eXP Series, eXP20-TTA - Chapter 7 Storage Function; General Introduction

Chapter 7 Storage Function
7-1
Chapter 7 Storage Function
7.1 General Introduction
Downloading the user project made in XP-Builder from PC, uploading the project stored in the device to PC,
updating the device and etc are available through connection with XGT Panel with Serial cable or Ethernet cable
generally. However, when those connections are not available, you can use USB storage equipment
☜
[XGT Panel main screen]
1. If you touch [Storage Function], the following dialog box shows.
2. In case of downloading the project by using USB storage equipment, touch [Project Download] button.
3. In case of transmitting the project data stored in the device to USB storage equipment, touch [Project
Upload] button.
4. In case of updating the XGT Panel with XGT Panel Software stored in USB Storage equipment, touch [XGT
Panel Update] button.