Chapter 4 Activation
4.1 Activate Device Locally
You are required to activate the device first by settings a strong password for it before you can use
the device.
Steps
1. Power on the device to enter the activation page automatically.
2. Create a password and confirm it.
Note
You can tap to enable or disable password reveal.
3. Tap Next to finish activation.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
What to do next
After activating the device, the quick configuration page will pop-up automatically. Refers to Quick
Configuration for details.
4.2 Activate Device via Web
You are required to activate the device first by setting a strong password for it before you can use
the device.
Default parameters of the door station are as follows:
● Default IP Address: 192.0.0.65.
● Default Port No.: 8000.
● Default User Name: admin
Steps
1. Power on the device, and connect the device to the network.
To Next Page
Loading...
