enter the menu.
If you want to authenticate via face or card, you should add administrator first. Refers to User
Management for details.
Steps
1. Hold the screen to enter the authentication page.
2. You can enter the admin password or authentication via face or card to enter the menu.
Note
Admin password is set as activation password.
Figure 5-6 Menu Page
5.3 Forget Admin Password
Admin password is used for authenticating to enter the local configuration menu. If you forget the
password, you can change it by entering security questions' answers.
Steps
1. Hold the main page to enter the authentication page.
Figure 5-7 Authentication Page
2. Tap Forgot Password.
3. Change the admin password via entering answers of security questions or email address.
4. Create and confirm a new password.
5.4 User Management
On the user management page, you can add new users, configure the user's room information,
card information, and face information.
Before You Start
Authenticate and enter the menu first. Refers to Authentication via Admin for details.
Steps
1. On the menu, tap User to enter the settings page.
To Next Page
Loading...
