Note
The uploaded picture should be within 200 KB, in JPG
、
JPEG
、
PNG format.
2) Click Add Card to enter Card No. and select the property of the card.
Note
Up to 5 cards can be supported.
Click Next to save the settings and go to the next parameter. Or click Skip to skip administrator
settings.
7.6 No. and System Network
Steps
1. Click in the top right of the web page to enter the wizard page. After previous settings, you
can click Next to enter the No. and System Network settings page.
2. Set the device type.
If set the device type as Door Station or Outer Door Station, you can set the Community No.,
Building No., Unit No., Floor No., and Door Station No.
If set the device type as Outer Door Station, you can set outer door station No., and community
No.
3. Set Registration Password, Main Station IP and Private Server IP.
4. Optional: Click to Enable Protocol 1.0.
5. Click Complete to save the settings after the configuration.
To Next Page
Loading...
