Figure 5-8 User Management
2. Tap + to enter the add user page.
3. Set Employee No., Name, Room No. and Floor No..
4. Add Face.
1) Tap Face Picture, and point the face at the camera.
2) Tap to add the face.
3) Tap to enable the settings.
5. Add Card.
1) Tap Card, and tap + to enter the add card page.
2) Enter the card No. manually or present the card in the card presenting area to obtain the card
No.
3) Tap OK to enable the settings.
6. Set User Role as Normal User or Administrator.
7. Exit the settings page.
5.5 Network Parameters Settings
The device support wired network, wireless network, cloud service settings and hotspot.
5.5.1 Edit Wired Network Parameters
The device should be connected to the network.
Before You Start
Authenticate and enter the menu first. Refers to Authentication via Admin for details.
Steps
1. On the menu, tap Network → Wired Network to enter the settings page.
To Next Page
Loading...
