ECO Mode
After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low
light or dark environment. You can set the ECO mode threshold and ECO mode (1: N).
ECO Mode (1:N)
Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejection rate.
Force to Enable Night Mode
You can click to enable forced night mode when the ECO mode is enabled.
Set Recognition Area
Click Configuration → Smart → Area Configuration.
Drag the yellow frame in the live video, drag the block or set value to adjust the recognition area.
Only the face within the area can be recognized by the system.
Select Capture Interval from the dropdown list.
Click Save to save the settings.
8.6.17 Set Screen Display
You can set the display theme for the device.
Click Configuration → Preference → Screen Display .
You can select display theme for device authentication. You can select Theme Mode as
Authentication or Advertisement.
Click Save.
Notice Publication
You can set the notice publication for the device.
Click Configuration → Preference → Notice Publication.
Theme Management
Click Media Library Management → + to upload the picture from the local PC.
You can click +, and set Name and Type to create a theme. After creating the theme, click + in
the Theme Management panel to select pictures in the media library. Click OK to add pictures
to the theme.
Schedule Management
After you have created a theme, you can select the theme and draw a schedule on the time line.
Select the drawn schedule, and you can edit the exact start and end time.
Select the drawn schedule and you can click Clear or Clear All to delete the schedule.
Slide Show Interval
Enter a number to set the slide show interval. The picture will be changed according to the
interval.
To Next Page
Loading...
