LTS LTH-401M-WIFI - Video Frame Rate Standards; Backlight and Image Fusion; Motion Detection Configuration

Set the video frame rate when performing live view remotely. After changing the standard,
you should reboot the device to take effect.
NTSC
30 frames per second. Suitable for the USA, Canada, etc.
PAL
25 frames per second. Suitable for China, the Middle East, Europe, etc.
Backlight
Enable or disable WDR.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Image Fusion
Wen the environment is dark, you can select Auto to enable the image fusion function. The
live view page will display the fusion image.
Select Disable to disable the function.
3. Click Restore Default Settings to restore the parameters to the default settings.
8.6.11 Motion Detection
Motion detection detects the moving objects in the configured security area, and a series of
actions can be taken when the alarm is triggered.
Steps
1. Click Configuration → Event → Event Detection → Motion to enter the settings page.
Figure 8-8 Motion Detection
2. Drag the block or set value to adjust sensitivity.