Chapter 5 Local Configuration
5.1 Quick Configuration
After activating the device, the quick configuration page will pop up automatically.
Steps
1. Select the system language and tap NEXT.
Figure 5-1 Select Language
2. Set password reset method and tap NEXT.
– Enter the Reserved Email address, then you can reset the admin password by email.
Note
On the security questions settings page, you can tap Change to Reserved Email to modify the
password reset method.
Figure 5-2 Password Reset by Setting Reserved Email Address
– Tap Change to Security Question. Select 3 security questions from deficiency list and enter
the answers of the questions, then you can reset the password by answering security
questions.
Figure 5-3 Password Reset by Setting Security Questions
3. Set network parameters and tap NEXT.
To Next Page
Loading...
