Figure 5-12 Local Settings
2. Tap Language and select a language at your needs.
3. Tap Number Configuration and set the building No., floor No., room No., project No., and unit
No. Tap < to save the settings.
4. Tap Mode Selection to choose live view or custom theme.
5. Tap to Enable Face Auth., Open Door via QR Code and Call Management Centerat your needs.
6. Tap Brightness and drag the block to adjust the screen light.
5.7 System Maintenance
You can restore the device, upgrade system, reboot device or view device information, capacity
and user manual on the system maintenance page.
Tap Maint. on the settings page to enter the system maintenance page.
Figure 5-13 System Maintenance
System Information
You can view the device model, serial No., APP version and disclaimer.
Capacity
You can view the used and total capacity of user, face and card.
Device Upgrade
Tap Upgrade to get the upgrade package online.
User Manual
You can scan the QR code to get the user manual.
Restore to Factory Settings
Tap Restore to Factory Settings to restore all parameters and reboot the system.
Restore to Default Settings
Tap Restore to Default Settings to restore the default settings and reboot the system.
Reboot
Tap to reboot the device.
To Next Page
Loading...
