LTS LTH-401M-WIFI - Network Settings; Basic Network Parameters (TCP;IP); DHCP Configuration; DNS Server Settings

You can view the device arming/disarming information. Click Refresh to refresh the page.
8.6.8 Network Settings
Set TCP/IP, Wi-Fi parameters, and device hotspot.
Set Basic Network Parameters
Click Configuration → Network → Network Settings → TCP/IP.
Figure 8-3 TCP/IP Settings
Set the parameters and click Save to save the settings.
DHCP
If disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway,
preferred DNS server and the Alternate DNS server.
If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway, preferred DNS server and the Alternate DNS server automatically.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.