Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connection.
Steps
Note
The function should be supported by the device.
1. Click Configuration → Network → Network Settings → Wi-Fi.
2. Check Wi-Fi.
3. Select a Wi-Fi
– Click Connect of a Wi-Fi in the list and enter the Wi-Fi password.
– Click Manual Add and enter a Wi-Fi's SSID, working mode, security mode, and password. Click
OK.
4. Set the WLAN parameters.
1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will
allocate the IP address, subnet mask, and default gateway automatically.
5. Set the DNS server. Set the preferred DNS server and alternate DNS server. Or enable DHCP and
the system will allocate the preferred DNS server and alternate DNS server automatically.
6. Click Save.
Device Hotspot
Set the device hotspot.
On the menu, tap Network → Hotspot to enter the settings page.
To Next Page
Loading...
