1. Installing software on your PC.
2. Register user accounts according to the prompts, and log in.
3. Follow the prompts to add the indoor station by scanning the QR code/barcode or manually
entering the serial number.
4. Enter unlock by QR code page and generate the QR code.
5. On the main page of door station, tap down button to enter the unlock by QR code page.
6. Aim the QR code generated by the phone at the camera and scan the code to open the door.
Note
● It is recommended that when installing the door station, try to select a location that does not
cause reflections, otherwise it may affect the QR code scanning. If it is acrylic door station,
make sure that the membrane on the surface of the door machine has been torn off.
● It is recommended to align the mobile phone's QR code with the door station camera
horizontally when scanning the QR code.
● QR code recognition is not supported at night.
To Next Page
Loading...
