d
The display shows:
ENTER PHONE #:_
Pause Quit
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
5 Enter the telephone number you want to be added to the Directory.
(You can enter up to 24 digits. A pause counts as 1 digit.)
NOTE: To place a 1.5 second pause between an access code, such
as "9," and the telephone number, press the softkey below Pause. A
pause will be inserted into the Directory entry, and a comma will
appear on the display.
d
After you have entered at least one digit, you will see the
following display:
ENTER PHONE #:9_
Pause Backspace Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
IMPORTANT: Hyphens, dashes and/or spaces are NOT necessary
between digits. (For example, in the Directory, the number,
555-1234, is entered as "5551234," without the intervening hyphen.)
NOTE: After you have entered 10 digits, including any pauses, the
words, "Enter Phone #:" begin to move off the display screen one
letter at a time in order to accommodate the remainder of the
telephone number.
When you are finished entering the phone number, press the softkey
below Done .
d
The display shows:
ENTER 5-CHAR NAME:_
Quit
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
27
To Next Page
Loading...