Press
cbbbbbbbc
bbbbbbb
< Prev
to page backwards through the names in the
Directory.
6 Press the softkey below the name of the entry you want to edit.
d
The display shows:
EDIT 5-CHAR NAME: Harv_
Backspace Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
7 If the phone number is correct and you don’t wish to edit it at this
time, press the softkey below Done.
If you want to edit the name, do the following:
You may need to press the dial pad key more than once to enter
the correct character. For example, press the GHI (or 4) key
once to enter a "G"; press the 4 key twice to enter an "H"; press
the key a third time to enter an "I." If you press the dial pad key
a fourth time, a "4" appears on the screen. If you press the key
again, the screen will again print a "G."
Use
cbbbbbbbc
bbbbbbb
Next >
to advance to the next letter.
Press the softkey below Backspace to move back and erase the
previous letter.
Press
cbbbbbbbc
bbbbbbb
< Prev
to move back a letter without erasing it.
8 When you have completed entering the 5-character name, press the
softkey below Done.
d
The display then shows:
EDIT PHONE #:5551234_
Pause Backspace Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
9 If the phone number is correct and you don’t wish to edit it at this
time, press the softkey below Done. (You are done editing a
directory entry.)
If you want to edit the phone number, do the following:
Press the softkey below Pause to insert a 1.5-second pause in
the telephone number. Each pause in the number is represented
on the screen by a comma.
30
To Next Page
Loading...