Setting the Call Log
To turn on or to turn off, or to set the Call Log
1 Press
cbbbbbbc
bbbbbb
Menu
.
2 Press the softkey below Option.
3 Press
cbbbbbbbc
bbbbbbb
Next >
twice to view the third Option screen.
d
The display shows the third option screen:
< OPTIONS
Tones CallLog Names Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
4 Press the softkey below CallLog.
NOTE: If the Call Log is locked, you will need to enter your 3-digit
password before you can use the Call Log. (See the information in
"Locking and Unlocking the Directory, Call Log, and All Softkeys"
later in this section.)
d
The display shows:
CALL LOG OPTIONS
Set-up Indicator Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
5 To set up your Call Log (turn Call Log off, logs only unanswered
calls, or logs all calls), press the softkey below Set-up.
d
The display shows the current status of the Call Log:
CALL LOG:UNANSWERED ONLY
Off Unansw All Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
38
To Next Page
Loading...