— Message light goes on.
— The display shows you the Feature Package number and the
Self-Test passed message.
NOTE: If these events do not occur, contact your System
Manager.
5 After you hear repeated tone, press any button on the voice terminal.
d
Terminal emits a key click.
6 Press
cbbbbbbc
bbbbbb
Mute
,
cbbbbbbbbc
bbbbbbbb
Speaker
,
cbbbbbbc
bbbbbb
Conf
, and
cbbbbbbbbc
bbbbbbbb
Transfer
.
d
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons go on steadily.
7 Press
cbbbbbbbc
bbbbbbb
Redial
,
cbbbbbc
bbbbb
Exit
,
cbbbbbbc
bbbbbb
Drop
, and
cbbbbbbc
bbbbbb
Hold
.
d
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons flutter.
8 Pick up handset and press each dial pad key.
d
Message light flutters.
d
Handset emits a touch tone as each key is pressed.
9 Hang up handset.
10 When the self-test is completed, press
cbbbbbc
bbbbb
Exit
twice.
NOTE: If you do
not
press
cbbbbbc
bbbbb
Exit
twice to end the test, the voice
terminal automatically exits the self-test after 30 seconds.
58
To Next Page
Loading...