To label and install the designation card and telephone number card
1 Tear the button designation card, along with the telephone number
card and attached "tail," from the user’s manual along the perforated
edges. (You may choose to take out one card at a time and leave
the remaining cards in the manual for future use, or you may choose
to tear out all four at one time.)
2 Label the button designation card with the appropriate number,
extension, name, or feature for each call appearance/feature button.
Label the telephone number card with your own telephone number.
You can handwrite or type the information on the cards or run the
cards through a laser printer.
3 Separate the button designation card and telephone number card
along the perforated border. You may discard the attached "tail"
section.
4 Place the button designation card under the plastic card cover on the
voice terminal. Place the telephone number card under the
telephone number card cover located beneath the handset.
70
To Next Page
Loading...
Need help?
General
