EasyManua.ls Logo

Lucent Technologies CBX 500 - Interface Standards; Other Standards; Physical Interfaces; Physical Connectors

Lucent Technologies CBX 500
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IOP and IOA Module Specifications
32-port Channelized T1/E1 FR/IP IOM
Beta Draft Confidential
CBX 500 Multiservice WAN Switch Hardware Installation Guide 4/5/03A-7
Interface Standards
• American National Standards Institute (ANSI) T1.231 (performance monitoring)
Other Standards
• Frame Relay Forum FRF.5, FRF.8, and FRF.16
•ITU-TG.703
• ITU-T G.704 — basic frame structure and cyclic redundancy check (CRC)
implementations
• ITU-T G.826 (performance parameters)
• E1 Management Information Base (MIB) — Request For Comment (RFC) 1406
(for near-end statistics)
• RFC 1490 translation FRAD
• HDLC/SDLC encapsulation FRAD (for X.25 traffic)
•CEMark
Physical Interfaces
32 physical ports per IOA module:
• T1 mode: 24 DS0 channels per physical port (768 logical ports per IOM, each at
64 Kbps)
• E1 mode: 30 TS0 channels per physical port (960 logical ports per IOM, each at
64 Kbps)
Physical Connectors
• 32-Port Channelized T1 FR/IP I/O connector panel: RJ48, 100-ohm
• 32-Port Channelized E1 FR/IP I/O connector panel: RJ48, 120-ohm

Table of Contents