Lucent Technologies CBX 500 - Regulatory Standards Compliance (Pending

Regulatory Information
Regulatory Standards Compliance (Pending)
Beta Draft Confidential
C-24/5/03 CBX 500 Multiservice WAN Switch Hardware Installation Guide
Regulatory Standards Compliance (Pending)
The following regulatory agencies have approved the CBX 500 and have found it to
be fully compliant with their environmental, safety, and emissions standards:
• Network Equipment Building System (NEBS) GR-63-CORE and
GR-1089-CORE
• British Approval Board for Telecommunications (BABT) — Safety and Factory
Compliance
• TUV — Safety and Factory Compliance to EN60950
• Canadian Standards Association (CSA) — Safety and Factory Compliance
CSA 22.2, No. 950
• Underwriter’s Laboratory (UL) — Safety and Factory Compliance UL 1950
• Federal Communications Commission (FCC) — EMC compliance
(Part 15 Class A)
In addition, Lucent’s CBX 500 switches meet the following country standards:
• Australia Safety - Austel
• New Zealand (EMC and Telecommunications Function)
Emissions
• FCC Part 15 Class A
• EN55022 Class A (CISPR)
• VCCI Class 1